Currently Empty: $0.00
Red 8mm Super-Flex Tubing Blumat
$9.00 – $39.00 + Tax
Product Description
This 8mm Super-Flex Tubing is the highest quality tubing we could find for blumat carrots and blumat watering systems. It is extruded from the highest quality silicone we could source. The material has a hardness rating of 60 Shore A and is heat-stabilized to withstand up to 500 degrees Fahrenheit, or 230 Celsius.
| Attribute | 10' roll, 50' roll |
|---|
Be the first to review “Red 8mm Super-Flex Tubing Blumat”
Customers Who Viewed This Item Also Viewed
Quick Comparison
| Settings | Red 8mm Super-Flex Tubing Blumat remove | BluSoak Drip Tape 10' Plant Ring - Ready to Connect to a Blumat Sensor remove | Blumat Classic (jr) Watering Stake remove | Blumat 8mm Tees remove | Blumat Standard Pressure Reducer 1bar (15psi) remove | 8mm Water Supply Tube for Blumats remove | ||
|---|---|---|---|---|---|---|---|---|
| Name | Red 8mm Super-Flex Tubing Blumat remove | BluSoak Drip Tape 10' Plant Ring - Ready to Connect to a Blumat Sensor remove | Blumat Classic (jr) Watering Stake remove | Blumat 8mm Tees remove | Blumat Standard Pressure Reducer 1bar (15psi) remove | 8mm Water Supply Tube for Blumats remove | ||
| Image |  |  |  |  |  |  | ||
| SKU | K409855 | 509422A | 842368C | 8854330 | 2386899 | |||
| Rating | ||||||||
| Price | $9.00 – $39.00 + Tax | $11.00 + Tax | $4.58 + Tax | $1.10 + Tax | $50.75 + Tax | $18.80 + Tax | ||
| Stock | Out of stock | 3 in stock | 12 in stock | 17 in stock | 3 in stock | 1 in stock | ||
| Availability | Out of stock | 3 in stock | 12 in stock | 17 in stock | 3 in stock | 1 in stock | ||
| Add to cart | ||||||||
| Description | ||||||||
| Content | This 8mm Super-Flex Tubing is the highest quality tubing we could find for blumat carrots and blumat watering systems. It is extruded from the highest quality silicone we could source. The material has a hardness rating of 60 Shore A and is heat-stabilized to withstand up to 500 degrees Fahrenheit, or 230 Celsius. | The BluSoak Drip Tape 10' Plant Ring is a pre assembled unit ready to be connected to your Blumat sensor and is ideal for larger pots that need more water coverage. A 10' soaker hose ready to plug into a Blumat sensor - just push the tubing into the Blumat output hose and wind around the area you'd like to keep moist. Distribution drippers are less expensive in small pots, this one less expensive in larger ones. Keeping more of the potting mix moist lets more roots grow and in effect gives you a much larger pot for the same pot and planting mix cost. This product comes with: 1 BluSoak to 3mm adapter 1 BluSoak End Plug 1 Distribution Dripper 10' of BluSoak 2.0 Drip Tape | Take a vacation and let your plants look after themselves. Blumat Plant Savers ensure a constant supply of water. They automatically supply just the right amount - never too much or not enough. Your plants will love it. They won't experience the drying out that stunts growth or the over-watering that squeezes the air out of the soil and keeps them from "breathing" properly. As the soil dries, the ceramic cone delivers water gradually into the surrounding earth - thereby creating a vacuum within the cone which draws water from the nearby container of water. Once the soil is moistened the Blumat Junior will cease flowing water. It waters your plants only as needed. | These tees are great for branching a side line of Blumats off in a different direction. They're also really good for the middle of a loop in a hydroponic and/or grow room. If you use one of these and a valve, it makes it easy to let air and sediment out before it can cause problems. | TRUE REDUCER - Not a mere flow controller, this brings water pressure down to 15 PSi (1 bar)! EASY TO INSTALL - Screws onto standard hose thread (3/4" input), and ouputs to 8mm tubing! ENDURING - Made from ABS plastic and designed with few points of failure, this is built to last! BLUMAT-READY - Designed specifically for blumat watering systems and 8mm tubing, no tools necessary! AUSTRIAN-ENGINEERED - This high-quality component is designed and manufactured by clever Austrians! Blumat systems need low pressure, much less than comes from normal house water connections. The blumat Pressure Reducer allows for easy integration of a municipal (or otherwise pressurized line, such as from a well) water line into a blumat, blusoak, or easysoak watering system. BEWARE IMPOSTERS! Many pressure reducers are not real pressure reducers at all, but are merely flow controllers, and reduce flow rates. However, reduced flow rates DO NOT necessarily correlate to reduced pressures. This is a true pressure reducer, and will reduce any incoming water (with a maximum pressure input of 87PSi) down to a 15PSi (1 bar) output. This is ideally suited and low enough for blumat systems and their components. Higher pressure will push tubing connections apart, and increase likelihood of flooding. This pressure reducer is extremely easy to use. The input side screws onto a standard 3/4" hose bibb or hose threading, often found on taps outside the home, or even faucets inside the home. The output side (featured with collar) is ideally suited for 8mm tubing (I suggest using our super-flex tubing). This is the size that integrates directly with tropf blumats. This adaptation makes setting up a blumat system from a hose or pressurized line an absolute breeze, and you can install your blumats in seconds. Blumat systems need low pressure, much less than comes from normal house water connections. Some of our kits include one of these but if you'd like to install the other ones or the separate components to a home water system, you'll need one of these Pressure Reducers. In gravity systems you'll also need one if your storage tank is high uphill. In Grow Rooms and Greenhouses with a reservoir for mixing nutrients, you can connect a small pressure pump to this and automatically feed your plants when you water. On one side it adapts to a 3/4" male hose thread and on the other directly to the Blumat 8 mm supply tube. Maximum input pressure is 87 psi. | This is the tubing used to connect Blumat components to your water source. It's an 8 mm European style. You can also use US-style 5/16" drip tube but it's hard to find. It's less expensive but isn't nearly as flexible. To make it easier to connect to fittings, dip tubing into hot water and then proceed to fit fitting into it. For disconnecting, pour hot water over fitting and pull, or simply cut into tubing with knife and slide off. Want easier to use supply tubing? Our high quality super-flex is ideal for being able to quickly connect and disconnect tubing, no water or cutting needed. | ||
| Weight | ||||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A | ||
| Additional information |
|
Related Products
There are no reviews yet.