Currently Empty: $0.00
Blumat Distribution Dripper
$1.40 + Tax
150 in stock
Product Description
Each Tropf Blumat can control 5 of these distribution drippers and saturate a 40″ length – either in a row or around a large plant. In a pressure system, by adjusting the black screw, it’s possible to do more than 5 but with a gravity system, usually better to stay with 2-3.
If your plants and conditions are the same, you can also put one Tropf Blumat in the first pot with one distribution dripper and one or two in each plant after that. One customer reported doing this successfully with 25 distribution drippers running off just one Blumat sensor.
Be the first to review “Blumat Distribution Dripper”
Quick Comparison
| Settings | Blumat Distribution Dripper remove | Blumat Support Stakes - Individual remove | BluSoak Drip Tape to 3mm Blumat Adapter remove | Blumat Standard Pressure Reducer 1bar (15psi) remove | Blumat 3mm Quick Connect On/Off Valve remove | 8mm Water Supply Tube for Blumats remove |
|---|---|---|---|---|---|---|
| Name | Blumat Distribution Dripper remove | Blumat Support Stakes - Individual remove | BluSoak Drip Tape to 3mm Blumat Adapter remove | Blumat Standard Pressure Reducer 1bar (15psi) remove | Blumat 3mm Quick Connect On/Off Valve remove | 8mm Water Supply Tube for Blumats remove |
| Image |  |  |  |  |  |  |
| SKU | 318647M | 553120N | 3758543 | 8854330 | K337039 | 2386899 |
| Rating | ||||||
| Price | $1.40 + Tax | $0.85 + Tax | $3.00 + Tax | $50.75 + Tax | $3.45 + Tax | $18.80 + Tax |
| Stock | 150 in stock | 1 in stock | 13 in stock | 3 in stock | 34 in stock | 1 in stock |
| Availability | 150 in stock | 1 in stock | 13 in stock | 3 in stock | 34 in stock | 1 in stock |
| Add to cart | ||||||
| Description | ||||||
| Content | Each Tropf Blumat can control 5 of these distribution drippers and saturate a 40" length - either in a row or around a large plant. In a pressure system, by adjusting the black screw, it's possible to do more than 5 but with a gravity system, usually better to stay with 2-3. If your plants and conditions are the same, you can also put one Tropf Blumat in the first pot with one distribution dripper and one or two in each plant after that. One customer reported doing this successfully with 25 distribution drippers running off just one Blumat sensor. | Individual Blumat brand dripper stakes. Each stake easily and securely holds a distribution dripper. | Connect your Blu Carrot Soaker Hose to a 3mm Blumat line quickly and easily with this adapter. This allows you to connect a Blumat sensor to your BluSoak 2.0 Drip Tape to allow it to detect when the soil is wet enough, and stop feeding the BluSoak with water. When the soil dries near the carrots, then the Blumat carrot (sensor) will begin to feed water back in to the BluSoak line. If the BluSoak isn't close enough to the sensor, make sure to use a distribution dripper (IG15557) in between the sensor and this fitting (example picture shown in third image). | TRUE REDUCER - Not a mere flow controller, this brings water pressure down to 15 PSi (1 bar)! EASY TO INSTALL - Screws onto standard hose thread (3/4" input), and ouputs to 8mm tubing! ENDURING - Made from ABS plastic and designed with few points of failure, this is built to last! BLUMAT-READY - Designed specifically for blumat watering systems and 8mm tubing, no tools necessary! AUSTRIAN-ENGINEERED - This high-quality component is designed and manufactured by clever Austrians! Blumat systems need low pressure, much less than comes from normal house water connections. The blumat Pressure Reducer allows for easy integration of a municipal (or otherwise pressurized line, such as from a well) water line into a blumat, blusoak, or easysoak watering system. BEWARE IMPOSTERS! Many pressure reducers are not real pressure reducers at all, but are merely flow controllers, and reduce flow rates. However, reduced flow rates DO NOT necessarily correlate to reduced pressures. This is a true pressure reducer, and will reduce any incoming water (with a maximum pressure input of 87PSi) down to a 15PSi (1 bar) output. This is ideally suited and low enough for blumat systems and their components. Higher pressure will push tubing connections apart, and increase likelihood of flooding. This pressure reducer is extremely easy to use. The input side screws onto a standard 3/4" hose bibb or hose threading, often found on taps outside the home, or even faucets inside the home. The output side (featured with collar) is ideally suited for 8mm tubing (I suggest using our super-flex tubing). This is the size that integrates directly with tropf blumats. This adaptation makes setting up a blumat system from a hose or pressurized line an absolute breeze, and you can install your blumats in seconds. Blumat systems need low pressure, much less than comes from normal house water connections. Some of our kits include one of these but if you'd like to install the other ones or the separate components to a home water system, you'll need one of these Pressure Reducers. In gravity systems you'll also need one if your storage tank is high uphill. In Grow Rooms and Greenhouses with a reservoir for mixing nutrients, you can connect a small pressure pump to this and automatically feed your plants when you water. On one side it adapts to a 3/4" male hose thread and on the other directly to the Blumat 8 mm supply tube. Maximum input pressure is 87 psi. | Use a 3mm quick-connect to turn the water from your supply line either on or off. Conveniently connect different fittings to serve different functions. Use a 3mm to 8mm to connect your main water line to your Blumat carrot line. Fit a 3mm to 3mm quick connect to turn the water going directly into your Blumats either on or off. Adapt a 1/4" drip line to the Blumat 8 mm tubing - quick and easy with this handy connector. Later if you like, you can change either side and go to 3 mm, 1/4, or 8 mm. These high quality quick connect can be implemented in a number of ways and are recommended for all watering systems to make your life easier. | This is the tubing used to connect Blumat components to your water source. It's an 8 mm European style. You can also use US-style 5/16" drip tube but it's hard to find. It's less expensive but isn't nearly as flexible. To make it easier to connect to fittings, dip tubing into hot water and then proceed to fit fitting into it. For disconnecting, pour hot water over fitting and pull, or simply cut into tubing with knife and slide off. Want easier to use supply tubing? Our high quality super-flex is ideal for being able to quickly connect and disconnect tubing, no water or cutting needed. |
| Weight | ||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A |
| Additional information |
Related Products
There are no reviews yet.