Currently Empty: $0.00
BluSoak Drip Tape to 3mm Blumat Adapter
$3.00 + Tax
13 in stock
Product Description
Connect your Blu Carrot Soaker Hose to a 3mm Blumat line quickly and easily with this adapter.
This allows you to connect a Blumat sensor to your BluSoak 2.0 Drip Tape to allow it to detect when the soil is wet enough, and stop feeding the BluSoak with water. When the soil dries near the carrots, then the Blumat carrot (sensor) will begin to feed water back in to the BluSoak line. If the BluSoak isn’t close enough to the sensor, make sure to use a distribution dripper (IG15557) in between the sensor and this fitting (example picture shown in third image).
Be the first to review “BluSoak Drip Tape to 3mm Blumat Adapter”
Quick Comparison
| Settings | BluSoak Drip Tape to 3mm Blumat Adapter remove | Blumat 3mm Quick Connect On/Off Valve remove | Blumat Support Stakes - Individual remove | Blumat Distribution Dripper remove | Blumat Distributor Drippers (Ten) + 2m of Drip Tube remove | Blumat 8mm Shut off Valve remove |
|---|---|---|---|---|---|---|
| Name | BluSoak Drip Tape to 3mm Blumat Adapter remove | Blumat 3mm Quick Connect On/Off Valve remove | Blumat Support Stakes - Individual remove | Blumat Distribution Dripper remove | Blumat Distributor Drippers (Ten) + 2m of Drip Tube remove | Blumat 8mm Shut off Valve remove |
| Image |  |  |  |  |  |  |
| SKU | 3758543 | K337039 | 553120N | 318647M | C936999 | 630080L |
| Rating | ||||||
| Price | $3.00 + Tax | $3.45 + Tax | $0.85 + Tax | $1.40 + Tax | $18.25 + Tax | $4.85 + Tax |
| Stock | 13 in stock | 34 in stock | Out of stock | 150 in stock | 6 in stock | Out of stock |
| Availability | 13 in stock | 34 in stock | Out of stock | 150 in stock | 6 in stock | Out of stock |
| Add to cart | ||||||
| Description | ||||||
| Content | Connect your Blu Carrot Soaker Hose to a 3mm Blumat line quickly and easily with this adapter. This allows you to connect a Blumat sensor to your BluSoak 2.0 Drip Tape to allow it to detect when the soil is wet enough, and stop feeding the BluSoak with water. When the soil dries near the carrots, then the Blumat carrot (sensor) will begin to feed water back in to the BluSoak line. If the BluSoak isn't close enough to the sensor, make sure to use a distribution dripper (IG15557) in between the sensor and this fitting (example picture shown in third image). | Use a 3mm quick-connect to turn the water from your supply line either on or off. Conveniently connect different fittings to serve different functions. Use a 3mm to 8mm to connect your main water line to your Blumat carrot line. Fit a 3mm to 3mm quick connect to turn the water going directly into your Blumats either on or off. Adapt a 1/4" drip line to the Blumat 8 mm tubing - quick and easy with this handy connector. Later if you like, you can change either side and go to 3 mm, 1/4, or 8 mm. These high quality quick connect can be implemented in a number of ways and are recommended for all watering systems to make your life easier. | Individual Blumat brand dripper stakes. Each stake easily and securely holds a distribution dripper. | Each Tropf Blumat can control 5 of these distribution drippers and saturate a 40" length - either in a row or around a large plant. In a pressure system, by adjusting the black screw, it's possible to do more than 5 but with a gravity system, usually better to stay with 2-3. If your plants and conditions are the same, you can also put one Tropf Blumat in the first pot with one distribution dripper and one or two in each plant after that. One customer reported doing this successfully with 25 distribution drippers running off just one Blumat sensor. | These are great for watering long plant beds, planter boxes, and giving large plants an even amount of water in a circle around them. They connect to a Tropf-Blumat or a Maxi.This is less expensive than adding more sensors but you may need to add a filter to your system if you use nutrients in your water so they don't clog. This pack contains 10 distributors and 2 meters of (6.5 feet) of 3mm drip tubing. Two nozzles allow you to connect tubing on both sides of the dripper for up to five drip locations from one Tropf-Blumat (dripper chain). The end-distributor dripper has a drip nozzle on one side only for use as the end piece in a dripper chain. You can go as far as 100 cm (39") from the sensor with these and they water about 20 cm wide (8"). Minimum pressure to use them like this is 4.5 psi. You can go down as low as 2 psi but the last dripper or two might not put out much water. By adjusting the black screw on the top, you can use more. In pressure systems, customers report successfully using as many as 25 with just one Blumat sensor. Set includes: 10 distribution drippers (8 regular + 2 end drippers) 2 meters (6.5 ft) 3mm drip tube | These shut-off (or on/off) valves from Blumat brand are the quarter-turn valves you've been looking for! These valves are ideal for blumat watering systems. They can be installed in-line in any 8mm tubing, but we recommend super-flex. Simply remove the collar, and place the collar over the 8mm tubing. Then slide the tubing over the 8mm barb, screw on the threaded collar, and you are in a perfect position to irrigate your plants! |
| Weight | ||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A |
| Additional information |
Related Products
There are no reviews yet.