Currently Empty: $0.00
Blumat Distributor Drippers (Ten) + 2m of Drip Tube
$18.25 + Tax
6 in stock
Product Description
These are great for watering long plant beds, planter boxes, and giving large plants an even amount of water in a circle around them. They connect to a Tropf-Blumat or a Maxi.This is less expensive than adding more sensors but you may need to add a filter to your system if you use nutrients in your water so they don’t clog. This pack contains 10 distributors and 2 meters of (6.5 feet) of 3mm drip tubing. Two nozzles allow you to connect tubing on both sides of the dripper for up to five drip locations from one Tropf-Blumat (dripper chain). The end-distributor dripper has a drip nozzle on one side only for use as the end piece in a dripper chain.
You can go as far as 100 cm (39″) from the sensor with these and they water about 20 cm wide (8″). Minimum pressure to use them like this is 4.5 psi. You can go down as low as 2 psi but the last dripper or two might not put out much water. By adjusting the black screw on the top, you can use more. In pressure systems, customers report successfully using as many as 25 with just one Blumat sensor.
Set includes:
10 distribution drippers (8 regular + 2 end drippers)
2 meters (6.5 ft) 3mm drip tube
Be the first to review “Blumat Distributor Drippers (Ten) + 2m of Drip Tube”
Customers Who Viewed This Item Also Viewed
Quick Comparison
| Settings | Blumat Distributor Drippers (Ten) + 2m of Drip Tube remove | BluSoak 2.0 Drip Tape remove | Blumat Tropf 9" Maxi Sensors remove | Quick Connect Bulkhead Fitting w/ Stop On Both Ends, 8mm remove | Blumat Support Stakes - Individual remove | 8mm Water Supply Tube for Blumats remove |
|---|---|---|---|---|---|---|
| Name | Blumat Distributor Drippers (Ten) + 2m of Drip Tube remove | BluSoak 2.0 Drip Tape remove | Blumat Tropf 9" Maxi Sensors remove | Quick Connect Bulkhead Fitting w/ Stop On Both Ends, 8mm remove | Blumat Support Stakes - Individual remove | 8mm Water Supply Tube for Blumats remove |
| Image |  |  |  |  |  |  |
| SKU | C936999 | 1108028 | X040165 | Z867371 | 553120N | 2386899 |
| Rating | ||||||
| Price | $18.25 + Tax | $0.90 + Tax | $9.25 + Tax | $17.60 + Tax | $0.85 + Tax | $18.80 + Tax |
| Stock | 6 in stock | 184 in stock | 19 in stock | 1 in stock | 1 in stock | 1 in stock |
| Availability | 6 in stock | 184 in stock | 19 in stock | 1 in stock | 1 in stock | 1 in stock |
| Add to cart | ||||||
| Description | ||||||
| Content | These are great for watering long plant beds, planter boxes, and giving large plants an even amount of water in a circle around them. They connect to a Tropf-Blumat or a Maxi.This is less expensive than adding more sensors but you may need to add a filter to your system if you use nutrients in your water so they don't clog. This pack contains 10 distributors and 2 meters of (6.5 feet) of 3mm drip tubing. Two nozzles allow you to connect tubing on both sides of the dripper for up to five drip locations from one Tropf-Blumat (dripper chain). The end-distributor dripper has a drip nozzle on one side only for use as the end piece in a dripper chain. You can go as far as 100 cm (39") from the sensor with these and they water about 20 cm wide (8"). Minimum pressure to use them like this is 4.5 psi. You can go down as low as 2 psi but the last dripper or two might not put out much water. By adjusting the black screw on the top, you can use more. In pressure systems, customers report successfully using as many as 25 with just one Blumat sensor. Set includes: 10 distribution drippers (8 regular + 2 end drippers) 2 meters (6.5 ft) 3mm drip tube | The BluSoak 2.0 when placed on the surface of soil or another growing medium ensures effective irrigation. This tape can be connected to Tropf Blumats and requires no electricity, batteries, timers or controllers. Without electricity, batteries, timers or controllers; BluSoak 2.0 connected to a Tropf Blumat will assure automatic, even irrigation while minimizing water and nutrient use. It saves time, water, labor, and nutrients while increasing yields and plant health. | The Tropf-Blumat Maxi acts as a regulator and dripper, just like the standard 5” Tropf-Blumat. This one is 9 inches long though. You put it in the ground 6 - 7.5 inches so it senses the moisture at a deeper level. This is important when your plants get bigger because the regular Blumat sensor might turn the water off too soon. This one might turn it off too soon if your plant still has surface roots. Some growers use both - especially if they are growing in coco or a hydroponic system. The Tropf-Blumat (Drip-Blumat) is a sensor that supplies plants with drips of water via thin tubing. As the soil dries, its natural suction power triggers the opening of the Tropf Blumat allowing the water to flow. When the soil is sufficiently moist, the Tropf Blumat automatically stops. The system functions fully automatically. Every plant, every container or group of plants requires at least 1 Tropf-Blumat adjusted to the individual needs of the plant. Larger containers or surfaces require longer or more than one sensor. | High quality, easy to use bulkhead fittings that automatically stop the water at both ends when a line is disconnected. Just a quick twist connects or disconnects supply tubing. Great for flushing -- quickly change from a reservoir with nutrients to one with just water. Also very helpful if you use different nutrients at different times. We also have adapters so you can connect these to 3mm or 1/4" line. | Individual Blumat brand dripper stakes. Each stake easily and securely holds a distribution dripper. | This is the tubing used to connect Blumat components to your water source. It's an 8 mm European style. You can also use US-style 5/16" drip tube but it's hard to find. It's less expensive but isn't nearly as flexible. To make it easier to connect to fittings, dip tubing into hot water and then proceed to fit fitting into it. For disconnecting, pour hot water over fitting and pull, or simply cut into tubing with knife and slide off. Want easier to use supply tubing? Our high quality super-flex is ideal for being able to quickly connect and disconnect tubing, no water or cutting needed. |
| Weight | ||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A |
| Additional information |
There are no reviews yet.