Currently Empty: $0.00
Blumat 8mm Shut off Valve
$4.85 + Tax
7 in stock
Product Description
These shut-off (or on/off) valves from Blumat brand are the quarter-turn valves you’ve been looking for! These valves are ideal for blumat watering systems. They can be installed in-line in any 8mm tubing, but we recommend super-flex. Simply remove the collar, and place the collar over the 8mm tubing. Then slide the tubing over the 8mm barb, screw on the threaded collar, and you are in a perfect position to irrigate your plants!
Be the first to review “Blumat 8mm Shut off Valve”
Customers Who Viewed This Item Also Viewed
Quick Comparison
| Settings | Blumat 8mm Shut off Valve remove | 8mm BULKHEAD / Through-Hull Tank Connector remove | BluSoak Drip Tape to 3mm Blumat Adapter remove | Blumat Support Stakes - Individual remove | Blumat 8mm Tees remove | Blumat Distribution Drippers- End Pieces, Individual remove |
|---|---|---|---|---|---|---|
| Name | Blumat 8mm Shut off Valve remove | 8mm BULKHEAD / Through-Hull Tank Connector remove | BluSoak Drip Tape to 3mm Blumat Adapter remove | Blumat Support Stakes - Individual remove | Blumat 8mm Tees remove | Blumat Distribution Drippers- End Pieces, Individual remove |
| Image |  |  |  |  |  |  |
| SKU | 630080L | M620810 | 3758543 | 553120N | 842368C | Y487379 |
| Rating | ||||||
| Price | $4.85 + Tax | $3.65 + Tax | $3.00 + Tax | $0.85 + Tax | $1.10 + Tax | $1.29 + Tax |
| Stock | 7 in stock | 1 in stock | 13 in stock | 1 in stock | 17 in stock | 33 in stock |
| Availability | 7 in stock | 1 in stock | 13 in stock | 1 in stock | 17 in stock | 33 in stock |
| Add to cart | ||||||
| Description | ||||||
| Content | These shut-off (or on/off) valves from Blumat brand are the quarter-turn valves you've been looking for! These valves are ideal for blumat watering systems. They can be installed in-line in any 8mm tubing, but we recommend super-flex. Simply remove the collar, and place the collar over the 8mm tubing. Then slide the tubing over the 8mm barb, screw on the threaded collar, and you are in a perfect position to irrigate your plants! | Connect a blumat system to a rain barrel or water storage tank. Just screw half on the inside of the tank, the other on the outside. The nipple connects to the standard blumat 8 mm water supply/feed line. You can either start with one of these bulkheads, or a blumat pressure reducer--either of these fittings will "start" your blumat watering system. blumat Classic Jr and blumat xl do not require either. Use 1/2" drill bit to puncture hole. | Connect your Blu Carrot Soaker Hose to a 3mm Blumat line quickly and easily with this adapter. This allows you to connect a Blumat sensor to your BluSoak 2.0 Drip Tape to allow it to detect when the soil is wet enough, and stop feeding the BluSoak with water. When the soil dries near the carrots, then the Blumat carrot (sensor) will begin to feed water back in to the BluSoak line. If the BluSoak isn't close enough to the sensor, make sure to use a distribution dripper (IG15557) in between the sensor and this fitting (example picture shown in third image). | Individual Blumat brand dripper stakes. Each stake easily and securely holds a distribution dripper. | These tees are great for branching a side line of Blumats off in a different direction. They're also really good for the middle of a loop in a hydroponic and/or grow room. If you use one of these and a valve, it makes it easy to let air and sediment out before it can cause problems. | Use these to end a Blumat distribution line. The regular distribution drippers have barbs on both sides so you need a way to end them without water dripping out too fast. You can do that with an end cap (IG15509) or with one of these. They are less expensive than the standard drippers and much easier to take on and off than the end caps. The end caps often need pliers to remove but they just pull on and off. |
| Weight | ||||||
| Dimensions | N/A | N/A | N/A | N/A | N/A | N/A |
| Additional information |
There are no reviews yet.