3mm Drip Tube for Blumat Systems

$8.25$26.75 + Tax

Product Description

This 3mm tubing is ideal for blumat watering systems and other unique irrigation applications. This is the sizing that is included with each blumat. This tubing runs through the caps/tops of each tropf blumat as well as the classic models.
This 3mm tubing size is also the tubing size designed for integrating distribution drippers to blumat systems. If you want to string drippers around your container, you will want some of this tubing! This 3mm silicone tubing is also ideal for integrating BluSoak drip tape to blumat watering systems as well. This is really the choice tubing for automatic drip irrigation kit(s) and any blumat watering system.

Attribute

50' Roll, 10' Roll

There are no reviews yet.

Be the first to review “3mm Drip Tube for Blumat Systems”

Quick Comparison

Settings3mm Drip Tube for Blumat Systems removeBlumat 8mm Shut off Valve removeBluSoak Drip Tape to 3mm Blumat Adapter removeBluSoak Drip Tape 10' Plant Ring - Ready to Connect to a Blumat Sensor removeBlumat Distributor Drippers (Ten) + 2m of Drip Tube remove8mm BULKHEAD / Through-Hull Tank Connector remove
Name3mm Drip Tube for Blumat Systems removeBlumat 8mm Shut off Valve removeBluSoak Drip Tape to 3mm Blumat Adapter removeBluSoak Drip Tape 10' Plant Ring - Ready to Connect to a Blumat Sensor removeBlumat Distributor Drippers (Ten) + 2m of Drip Tube remove8mm BULKHEAD / Through-Hull Tank Connector remove
Image
SKU630080L3758543K409855C936999M620810
Rating
Price$8.25$26.75 + Tax$4.85 + Tax$3.00 + Tax$11.00 + Tax$18.25 + Tax$3.65 + Tax
Stock

Out of stock

13 in stock

3 in stock

6 in stock

Out of stock

AvailabilityOut of stock13 in stock3 in stock6 in stockOut of stock
Add to cart

Description
ContentThis 3mm tubing is ideal for blumat watering systems and other unique irrigation applications. This is the sizing that is included with each blumat. This tubing runs through the caps/tops of each tropf blumat as well as the classic models. This 3mm tubing size is also the tubing size designed for integrating distribution drippers to blumat systems. If you want to string drippers around your container, you will want some of this tubing! This 3mm silicone tubing is also ideal for integrating BluSoak drip tape to blumat watering systems as well. This is really the choice tubing for automatic drip irrigation kit(s) and any blumat watering system.These shut-off (or on/off) valves from Blumat brand are the quarter-turn valves you've been looking for! These valves are ideal for blumat watering systems. They can be installed in-line in any 8mm tubing, but we recommend super-flex. Simply remove the collar, and place the collar over the 8mm tubing. Then slide the tubing over the 8mm barb, screw on the threaded collar, and you are in a perfect position to irrigate your plants!Connect your Blu Carrot Soaker Hose to a 3mm Blumat line quickly and easily with this adapter. This allows you to connect a Blumat sensor to your BluSoak 2.0 Drip Tape to allow it to detect when the soil is wet enough, and stop feeding the BluSoak with water. When the soil dries near the carrots, then the Blumat carrot (sensor) will begin to feed water back in to the BluSoak line. If the BluSoak isn't close enough to the sensor, make sure to use a distribution dripper (IG15557) in between the sensor and this fitting (example picture shown in third image).The BluSoak Drip Tape 10' Plant Ring is a pre assembled unit ready to be connected to your Blumat sensor and is ideal for larger pots that need more water coverage. A 10' soaker hose ready to plug into a Blumat sensor - just push the tubing into the Blumat output hose and wind around the area you'd like to keep moist. Distribution drippers are less expensive in small pots, this one less expensive in larger ones. Keeping more of the potting mix moist lets more roots grow and in effect gives you a much larger pot for the same pot and planting mix cost. This product comes with: 1 BluSoak to 3mm adapter 1 BluSoak End Plug 1 Distribution Dripper 10' of BluSoak 2.0 Drip TapeThese are great for watering long plant beds, planter boxes, and giving large plants an even amount of water in a circle around them. They connect to a Tropf-Blumat or a Maxi.This is less expensive than adding more sensors but you may need to add a filter to your system if you use nutrients in your water so they don't clog. This pack contains 10 distributors and 2 meters of (6.5 feet) of 3mm drip tubing. Two nozzles allow you to connect tubing on both sides of the dripper for up to five drip locations from one Tropf-Blumat (dripper chain). The end-distributor dripper has a drip nozzle on one side only for use as the end piece in a dripper chain. You can go as far as 100 cm (39") from the sensor with these and they water about 20 cm wide (8"). Minimum pressure to use them like this is 4.5 psi. You can go down as low as 2 psi but the last dripper or two might not put out much water. By adjusting the black screw on the top, you can use more. In pressure systems, customers report successfully using as many as 25 with just one Blumat sensor. Set includes: 10 distribution drippers (8 regular + 2 end drippers) 2 meters (6.5 ft) 3mm drip tubeConnect a blumat system to a rain barrel or water storage tank. Just screw half on the inside of the tank, the other on the outside. The nipple connects to the standard blumat 8 mm water supply/feed line. You can either start with one of these bulkheads, or a blumat pressure reducer--either of these fittings will "start" your blumat watering system. blumat Classic Jr and blumat xl do not require either. Use 1/2" drill bit to puncture hole.
Weight
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Attribute

50' Roll, 10' Roll